Filter By:
- Parts & Accessories (171)
- Hitch-Mount (85)
- Pickup/RV/Spare-Tire Mount (39)
- Roof-Mount (66)
- Trunk-Mount (25)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks

$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

$4.95
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty

$7.70
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

$12.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in

$14.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$15.00
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

$19.00
- Beacon Light License plate relocation bracket
- Includes bracket, M5 x 10mm (2), M5 x 16mm (2) Torx screws, mini Torx screwdriver

$19.00
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in

$19.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle.
- Easy cam lever for quick installation
- Durable stainless steel skewer
- Up to 110mm front hubs
Product Specs:
- Weight: 0.44 lbs.
- Dimensions: L 9.00 in x W 0.75 in x H 2.00 in
- Limited Lifetime Warranty

$19.95
An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles.
- Enables transportation of wheels with 12-15 mm thru-axle forks
$19.95
An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles.
- Enables transportation of bikes with 20x110 mm thru-axle forks

$19.95
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon.
- Sold as a set of two
- Replacement parts for broken or lost end caps

$19.99
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack
- Provides a clean and sleek look for your Saris Bones rack
- Upgrade your current Bones or Bones EX rack (pre-2022)
- Compatible with: Bones or Bones EX racks
- Not compatible to use with any Bones Hitch racks or SUPERBones

$19.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

$20.00
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

$20.00
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market.
- Includes T-slot hardware, covers, and install tool.
- Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts.
- Compatible with Yakima JetStream bars and most other T-slot style crossbars.
Product Specs:
- Weight: 0.25 lbs.
- Dimensions: L 2.75 in x W 1.50 in x H 0.50 in
- Limited Lifetime Warranty

$20.00
Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

$24.99
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks
- Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges.
- Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps
- Quick and easy to install and attach to your Saris Trunk Rack.
- Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks.
- Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

$24.99
- Great for storage or transportation
- Alloy construction
- Can be mounted vertically or horizontally

$24.99 - $33.99
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
Page 1 of 13
Next page