Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable.
- 12 Lumens
- Micro USB rechargeable
- 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours)
- Water Resistant
- 16 grams
- 26mm tall, 39mm wide, 20mm thick (w/o bracket)
- Made in the USA
- Enables Take a Look Original Eyeglass Mirror to fit helmets
- Does not work with Take a Look Compact Eyeglass Mirror
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light.
Features
- Dimensions: 70.5 x 28.5 x 23 mm
- Weight: 51.5 g (with bracket and batteries)
- Light source: White LED x1, Red LED x1
- Battery: AAA alkaline battery x2
- Mount: Rubber band (Long)
Modes/Run Time
- (Front) Constant mode (15 lumens): 100hrs
- (Rear) Constant mode (10 lumens): 100hrs
- (Front) Flashing mode (30 lumens): 100hrs
- (Rear) Flashing mode (10 lumens): 100hrs
The Jandd Helmet Cover offers protection from the elements.
- 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light
- Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes
- Fits most bike helmets and keeps water from penetrating
- NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts.
- Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain)
- Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible
- T Slot (For modular): Allows for quick release of the light when parking your bike
- Weight: 20g
The PWR helmet extension mount is designed for use with the PWR modular lights. Use it to attach the lighthead to your helmet so you can stash the battery in your backpack.
- Compatible with the PWR Road, PWR Trail, and PWR Mountain light heads
- Internal screw is made of nylon plastic and is designed to snap in case of accidents for rider helmet protection
- Fits most vented helmets, common for road and trail cycling
- Stretched cable length: 80cm
- Weight: 100g
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination.
Featuring:
- 600 Lumen Output Certified to the FL-1 Standard
- Daylight Visible Pulse Mode
- Integrated Battery Pack With Red Rear Lighting
- Innovative Amber Sidelights Provides Critical Side Visibility at Intersections
- Ultra-lightweight Setup With Easy Clip On/Off Design
- Waterproof to 1 meter For All-Conditions Reliability
- Accurate Battery Charge & Status Indicator
- Micro USB Rechargeable
Included:
- Helmet Mounts & Micro USB Charging Cable
• Adjustable rack-and-pinion system
• Requires one hand to adjust
• Includes ergonomic foam padding
• Lightweight
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike.
Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
- Replacement Visor for Max/Contour Helmet
- Size Specific for Contour LG/XL
- Replacement visor for all Chamonix helmets for model year 2014 to present.
- One Size
Ponytail-ready HairPort SL II fit system with six height positions and micro-adjustable dial for optimized fit.
- Helmet not included, sold separately
Replacement fit system assembly for Echelon, Echelon II, Propero II, Tactic, Tactic II with mushroom-plug snap attachment (verses the new 5-position adjustable attachment).
Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments.
- Helmet not included, sold separately
Page 1 of 2
Next page